Hysteresis of ruby fluorescent line by pressure and annealing effect

Abstract

Accuracy of hydrostatic pressure measurement in a diamond-anvil cell (DAC) depends on the reproducibility of ruby RI fluorescent measurement. The larger scatter in R, fluorescent wavelength shift than the reproducibility of spectroscopic measurement was observed among appropriately mirror-finished ruby plates before setting up in DAC. The characteristics of the scatter changed after loading DAC up to pressure over hydrostatic limit. They vanished by annealing the ruby plates. These phenomena are presumably due to the appearance and disappearance of the residual stress in the ruby crystal. Such hysteresis of ruby fluorescent wavelength shift by pressure and its annealing effect are discussed.     

Sound transmission from stiffened double laminated composite plates

An analytical model is developed to investigate the sound transmission loss from orthogonally rib-stiffened double laminated composite plates structure under a plane sound wave excitation, in which first order shear deformation theory is presented for laminated composite plates. By using the space harmonic approach and virtual work principle, the sound transmission loss is described analytically. The validity and feasibility of the model are verified by comparing the present theoretical predictions with numerical results published previously. The influences of structure geometrical parameters on sound transmission loss are subsequently presented. Through numerical results, it can be concluded that the proposed analytical model is accurate and simple in solving the vibroacoustic behavior of an orthogonally rib-stiffened double laminated composite plates.     

Microstructural and mechanical analysis of Cu and Au interconnect on various bond pads

Effects of High Temperature Storage (HTS) and bonding toward microstructure change of intermetallic compound (IMC) at the wire bonding interface of 3 types of bond pad (Al, AlSiCu and NiPdAu) were presented in this paper. Optical and electron microscope analyses revealed that the IMC growth rate of samples under 175 and 200 °C HTS increased in the order of Al > AlSiCu > NiPdAu. Besides, higher HTS and bonding temperatures also promoted higher IMC thickness. The compositional study showed that higher HTS and bonding temperature developed rapid interdiffusion in bonding interface. In the mechanical ball shear test, a decrease of the shear force of Al and AlSiCu bond pads after 500 h HTS was believed due to poorly developed IMC at bonding interface. On the other hand, shear force degradation at 1000 h was due to excessive growth of IMC that in turn causes the formation of defects. For NiPdAu bond pad, increasing trend of shear force with HTS duration at 175 °C implied a good reliability of the Cu wire bonding. The rapid microscopic inspection on Cu wired Al bond pad under HTS 175 °C showed the IMC development from the periphery to the center of the ball bond. However, after 500 h voids started to develop until the crack was observed at 1000 h.     

Multi-sensors SAR system for real-time dosimetry assessment

A multi-sensor test-bench for determining the SAR (specific absorption rate) due to wireless devices emitting in equivalent human tissues is presented. Real-time SAR assessment is proposed considering a spatially distributed multiprobe test-bench. In comparison with a multi-axial robot SAR system, the proposed one does not require any displacement, thus reducing drastically acquisition time, once parallel data acquisition and interpolation techniques are employed for accelerating measurements.     

Radiometrie Investigations into Gas-Solid-Fluidized Beds

Investigations made into a gas-solid-fluidized bed model reactor, aiming at obtaining statements about the spatial and time density distributions within the fluidized bed and the correlation between the state of the turbulent layer and a characteristic measured quantity as well as variation of a physical property of the solid. statisticl evaluation techniques are indispensable, owing to the elementary actions occuring within the fluidized bed reactor and their random nature. Such parameters of the fluidized bed could be determined from a totality of individual measurements for measuring periods of 10 ms per single measurement by use of a miniature measuring probe within the interior of the fluidized bed reactor. This probe consisted of a beta-radition source and a Si-surface barrier-layer detector.     

A System for Determination of Precise Isotopic Vapor Pressure Differences from —20 to 110 °C,including Temperature Control to 0·001 over that Range)

An experimental system for the precise measurement of small vapor pressure differences over the range —20 to 110°C is described.     

Dielectric barrier discharge in needle-to-plane configuration: Model of surface charge relaxation

Relaxation process of surface charge owing to dielectric barrier discharge (DBD) in “needle – air gap – polyethylene terephthalate film – plane” configuration is considered. Experimental data of the surface charge relaxation (SCR) are obtained by means of the rotating capacitive probe. Taking into account Gaussian radial distribution of accumulated charge density, effective surface and volume electrical conductivities of a barrier dielectric, phenomenological model of SCR for any dielectric thickness is proposed and exact solutions are obtained. The adequacy of the model is confirmed by the numerical computation. There is a good agreement between the experimental results and the model calculations.     

Numerical analysis of stress distribution in the upper arm tissues under an inflatable cuff: Implications for noninvasive blood pressure measurement

An inflatable cuff wrapped around the upper arm is widely used in noninvasive blood pressure measurement. However, the mechanical interaction between cuff and arm tissues, a factor that potentially affects the accuracy of noninvasive blood pressure measurement, remains rarely addressed. In the present study, finite element (FE) mod-els were constructed to quantify intra-arm stresses generated by cuff compression, aiming to provide some theoretical evi-dence for identifying factors of importance for blood pressure measurement or explaining clinical observations. Obtained results showed that the simulated tissue stresses were highly sensitive to the distribution of cuff pressure on the arm sur-face and the contact condition between muscle and bone. In contrast, the magnitude of cuff pressure and small variations in elastic properties of arm soft tissues had little influence on the efficiency of pressure transmission in arm tissues. In par-ticular, it was found that a thickened subcutaneous fat layer in obese subjects significantly reduced the effective pres-sure transmitted to the brachial artery, which may explain why blood pressure overestimation occurs more frequently in obese subjects in noninvasive blood pressure measurement.     

基于两平行线及其线上三点的摄像机标定方法

在大视场交通监控摄像机的标定中,由于不便于放置大尺寸标定靶标,常采用交通标线构成的特定几何图形替代标定靶标,但许多交通场景仅有一组平行的车道分界交通标线,难以获得传统标定方法所需的标定约束条件。针对此类交通场景,选取两平行交通标线和其中一条线上的三点作为标定参考物,依靠其中一条线上三点在单幅图像中的像素坐标、三点间的两个距离值及平行线间距作为约束条件来完成摄像机的标定。建立了图像坐标系与世界坐标系之间新的换算关系,推导出了摄像机内外参数的求解公式,探讨了旋转角对测量误差的影响。实验结果表明,在约束条件不足的情况下能够获得较好的摄像机参数近似解,沿道路方向上的测距精度优于对比文献的结果,具有标定参考物选取容易、操作简便、几何约束条件少等优点,适用于交通监控系统中大视场摄像机的快速标定场合。